Pair and connect the headset to your phone
Before using the headset, you must pair and connect it to a compatible phone.
1 Make sure your headset is switched off and your compatible phone is on.
2 If you've never paired the headset with a device, or you've cleared the pairings,
switch the headset on.
If you've previously paired your headset with another device, press and hold
for 5 seconds.
Pairing mode is switched on, and a blue indicator light starts to flash quickly.
4
3 Within 3 minutes, switch Bluetooth on in your phone, then set it to search for
Bluetooth devices. For details, see the user guide of the phone.
4 On your phone, select the headset from the list of found devices.
5 If asked, type in the passcode 0000.
When the headset is connected to a phone, the Bluetooth indicator light flashes
slowly.
You can pair your headset with 8 phones, but you can only connect it to 2 phones at
the same time.
With some phones, you may need to make the connection separately after pairing.
Tip: Can't connect the headset to a compatible phone? Make sure that the headset
is charged, switched on, and paired with the phone.